| --- --- |
| | | APWORKSHOP.COM.AU | |||||||||||||||||||||||||||||||||||||||
  
    | |||||||||||||||||||||||||||||||||||||||||||
| Router Bits | RAISED PANEL BITS
# 5 (BEVEL 25º) |
|
| ||||||||||||||||||||||||||||||||||||||||
CARBIDE TIPPED | |||||||||||||||||||||||||||||||||||||||||||
| Available in two versions, with ball bearing guide (not illustrated) or without ball bearing guide (illustrated). Both produce identical forms. This same profile also can be produced by the vertical bit TPDV 5 1/2, sometimes preferred for its smaller bit diameter. | |||||||||||||||||||||||||||||||||||||||||||
 | |||||||||||||||||||||||||||||||||||||||||||
| Part # Description A inch A mm B inch B mm C inch C mm A$ TPD 5 1/2 RAISED PANEL BIT 3 76.2 5/8 15.9 2-3/4 70 none 80.70 TPD 5 B 1/2 RAISED PANEL BIT W/BRG 3 76.2 5/8 15.9 2-3/4 70 TB11 86.50 | |||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||
| M= Metric Size, H= High Speed Steel, T= Carbide Tipped or Solid Carbide, A= Carbide Tipped on Nose (Pilot Panel Bits) B= Ball Bearing Guide, E/C = End Cutting, S = Single Flute, X= Long series bits not warrantied against breakage, XX= Extra long series bits not warrantied against breakage. Where bits are available in various arbor/shank diameters, suffix indicates: 5/16 inch, 3/8 inch, 1/2 inch, 10 mm (otherwise 1/4 inch). In diagrams, A= Cutting Width, B= Flute Length, C= Overall Length (includes bearing and screw), R, R1 or R2 = Radius of Cut, E= Pilot or Bearing Width, G= Depth of Cut, Bevel = Bevel, ID= Inside Diameter, T= Wood Thickness. | |||||||||||||||||||||||||||||||||||||||||||
| | |||||||||||||||||||||||||||||||||||||||||||
| | |||||||||||||||||||||||||||||||||||||||||||
