--- --- 
AUSTRALIA
APWORKSHOP.COM.AU
Router Bits
by
EDGE FORMING BITS
CLASSICAL
CARBIDE TIPPED
TWO FLUTES WITH BALL BEARING GUIDE TB 11
Shank: 1/2 inch (12.7 mm) is shown in the part number, otherwise is 1/4 inch (6.35 mm )
This versatile bit produces a very decorative moulding used extensively in many furniture and building applications. Optional fitting of bearing TB 9 provides variations (see below).
Part # Description A inch A mm B inch B mm C inch C mm R inch R mm A$ TC 8 B CLASSICAL BIT 1/8 W/BRG 1-1/8 28.6 1/2 12.7 2 50.8 1/8 3.2 46.90 TC 8 B 1/2 CLASSICAL BIT 1/8 W/BRG 1-1/8 28.6 1/2 12.7 2-1/2 63.5 1/8 3.2 46.90 TC 12 B CLASSICAL BIT 3/16 W/BRG 1-3/8 35 5/8 15.9 2-1/4 57.1 3/16 4.8 52.80 TC 12 B 1/2 CLASSICAL BIT 3/16 W/BRG 1-3/8 35 5/8 15.9 2-3/4 70 3/16 4.8 52.80 TC 16 B 1/2 CLASSICAL BIT 1/4 W/BRG 1-5/8 41 3/4 19 2-3/4 70 1/4 6.35 58.90 
M= Metric Size, H= High Speed Steel, T= Carbide Tipped or Solid Carbide, A= Carbide Tipped on Nose (Pilot Panel Bits) B= Ball Bearing Guide, E/C = End Cutting, S = Single Flute, X= Long series bits not warrantied against breakage, XX= Extra long series bits not warrantied against breakage. Where bits are available in various arbor/shank diameters, suffix indicates: 5/16 inch, 3/8 inch, 1/2 inch, 10 mm (otherwise 1/4 inch). In diagrams, A= Cutting Width, B= Flute Length, C= Overall Length (includes bearing and screw), R, R1 or R2 = Radius of Cut, E= Pilot or Bearing Width, G= Depth of Cut, Bevel = Bevel, ID= Inside Diameter, T= Wood Thickness.