AUSTRALIA H O M E Bits by Profile Bits by Type Bits By Name --- Straight Pilot Panel Laminate Trim & Cut Slot Cutters & Trim Saws Groove Forming Edge & Face Forming Edge Forming Solid Surface Face Forming Face Moulding Jointing Panel Door & Window Raised Panel Accessories & Kits Replaceable Insert Econocut Range --- Print Catalogue About Us Contact Us FAQ Order & Shipping Information				APWORKSHOP.COM.AU
				Router Bits by	LAMINATE TRIM BITS & CUTTERS   HIGH PERFORMANCE PROFESSIONAL RANGE (4 Flutes)
				CARBIDE TIPPED FOUR FLUTES WITH BALL BEARING GUIDE Shank: 1/2 inch (12.7 mm) is shown in the part number, otherwise is 1/4 inch (6.35 mm )
				These tools produce a chatter-free trimmed edge. At high feed rates they produce a superior finish to any other tool. Assembly includes 4-flute cutter, arbor, bearing (TB12), nut and washer.
				ASSEMBLIES Part # Description Shank Bevel Arbor C inch C mm A$ TA 194.00 B FLUSH TRIM W/BRG 4 FLUTE 1/4 Flush TA1 2-1/2 63.5 47.80 TA 194.00 B 1/2 FLUSH TRIM W/BRG 4 FLUTE 1/2 Flush TA3 2-1/2 63.5 47.80 TA 194.15 B 15º BEVEL W/BRG 4 FLUTE 1/4 15 degrees TA1 2-1/2 63.5 47.80 TA 194.15 B 1/2 15º BEVEL W/BRG 4 FLUTE 1/2 15 degrees TA3 2-1/2 63.5 47.80 TA 194.25 B 25º BEVEL W/BRG 4 FLUTE 1/4 25 degrees TA1 2-1/2 63.5 47.80 TA 194.25 B 1/2 25º BEVEL W/BRG 4 FLUTE 1/2 25 degrees TA3 2-1/2 63.5 47.80 TA 194.45 B 45º BEVEL W/BRG 4 FLUTE 1/4 45 degrees TA1 2-1/2 63.5 47.80 TA 194.45 B 1/2 45º BEVEL W/BRG 4 FLUTE 1/2 45 degrees TA3 2-1/2 63.5 47.80 CUTTERS ONLY Part # Description Bevel Bore A inch A mm A$ T 194.00 REPLACEMENT CUTTER FLUSH TRIMMER 4 FLUTE Flush 8 mm (5/16) 0.866 22 33.80 T 194.15 REPLACEMENT CUTTER RIGHT HAND 15º 4 FLUTE 15 degrees 8 mm (5/16) 1 25.4 33.80 T 194.25 REPLACEMENT CUTTER RIGHT HAND 25º 4 FLUTE 25 degrees 8 mm (5/16) 1-1/8 28.6 33.80 T 194.45 REPLACEMENT CUTTER RIGHT HAND 45º 4 FLUTE 45 degrees 8 mm (5/16) 1-3/8 35 33.80
				Part Codes and Diagrams M= Metric Size, H= High Speed Steel, T= Carbide Tipped or Solid Carbide, A= Carbide Tipped on Nose (Pilot Panel Bits) B= Ball Bearing Guide, E/C = End Cutting, S = Single Flute, X= Long series bits not warrantied against breakage, XX= Extra long series bits not warrantied against breakage. Where bits are available in various arbor/shank diameters, suffix indicates: 5/16 inch, 3/8 inch, 1/2 inch, 10 mm (otherwise 1/4 inch). In diagrams, A= Cutting Width, B= Flute Length, C= Overall Length (includes bearing and screw), R, R1 or R2 = Radius of Cut, E= Pilot or Bearing Width, G= Depth of Cut, Bevel = Bevel, ID= Inside Diameter, T= Wood Thickness.
				Current Specials I Catalogue Home I Site Map I Site Search I Contact Us I View Shopping Cart I Site Help
				Web pages and graphic conversions ©Copyright 2000 AP Workshop. Original images ©Copyright CARB-I-TOOL Aust. Pty Ltd.