AUSTRALIA H O M E Bits by Profile Bits by Type Bits By Name --- Straight Pilot Panel Laminate Trim & Cut Slot Cutters & Trim Saws Groove Forming Edge & Face Forming Edge Forming Solid Surface Face Forming Face Moulding Jointing Panel Door & Window Raised Panel Accessories & Kits Replaceable Insert Econocut Range --- Print Catalogue About Us Contact Us FAQ Order & Shipping Information				APWORKSHOP.COM.AU
				Router Bits by	LAMINATE TRIM BITS & CUTTERS   FLUSH TRIMMING
				CARBIDE TIPPED TWO FLUTES DOUBLE BALL BEARING GUIDE Shank: 1/2 inch (12.7 mm) is shown in the part number, otherwise is 1/4 inch (6.35 mm )
				This bit has been specially designed for template work in softer timbers. Where a single bearing might create an indentation on the timber, this bit has double the surface area to ensure the template surface is not damaged.
				Part # Description Shank A inch A mm B inch B mm C inch C mm Bearing A$ T 8012 BB FLUSH TRIM 3/8 W/BRGS 1/4 3/8 9.5 1 25.4 2-3/4 70 TB-9 32.40 TS 8016 BB FLUSH TRIM 1/2 W/BRGS SHORT 1/4 1/2 12.7 5/8 15.9 2-3/8 60 TB-11 32.40 T 8016 BB FLUSH TRIM 1/2 W/BRGS 1/4 1/2 12.7 1 25.4 2-3/4 70 TB-11 34.90 T 8016 BB 1/2 FLUSH TRIM 1/2 W/BRGS 1/2 1/2 12.7 1 25.4 3-7/8 98 TB-11 34.90 TX 8016 BB 1/2 FLUSH TRIM 1/2 W/BRGS LONG 1/2 1/2 12.7 1-1/2 38.1 3-7/8 98 TB-11 41.40 TXX 8016 BB 1/2 FLUSH TRIM 1/2 W/BRG EXTRA LONG 1/2 1/2 12.7 2 50.8 4-1/4 108 TB-11 46.90 T 8020 BB FLUSH TRIM 5/8 W/BRGS 1/4 5/8 15.9 1 25.4 3 76 TB-14 36.00 T 8020 BB 1/2 FLUSH TRIM 5/8 W/BRGS 1/2 5/8 15.9 1 25.4 3-3/8 86 TB-14 36.00 T 8028 BB 1/2 FLUSH TRIM 22 mm W/BRGS 1/2 0.866 22 1 25.4 3-1/2 89 TB-12 37.30 TX 8028 BB 1/2 FLUSH TRIM 22 mm W/BRGS LONG 1/2 0.866 22 1-1/2 38.1 3-15/16 100 TB-12 44.00
				Part Codes and Diagrams M= Metric Size, H= High Speed Steel, T= Carbide Tipped or Solid Carbide, A= Carbide Tipped on Nose (Pilot Panel Bits) B= Ball Bearing Guide, E/C = End Cutting, S = Single Flute, X= Long series bits not warrantied against breakage, XX= Extra long series bits not warrantied against breakage. Where bits are available in various arbor/shank diameters, suffix indicates: 5/16 inch, 3/8 inch, 1/2 inch, 10 mm (otherwise 1/4 inch). In diagrams, A= Cutting Width, B= Flute Length, C= Overall Length (includes bearing and screw), R, R1 or R2 = Radius of Cut, E= Pilot or Bearing Width, G= Depth of Cut, Bevel = Bevel, ID= Inside Diameter, T= Wood Thickness.
				Current Specials I Catalogue Home I Site Map I Site Search I Contact Us I View Shopping Cart I Site Help
				Web pages and graphic conversions ©Copyright 2000 AP Workshop. Original images ©Copyright CARB-I-TOOL Aust. Pty Ltd.